Product name

Cracking paste

State

Paste

Packing

25KG/drum for white, 20KG/drum for clear

Storage

6 months in cool place

Application

Suitable for knitting

Features

1. High fastness

2. High softness

3. SGS detecting passed, no PVC, no heavy metal, no NPEOs.

Mix proportion

Light: White cracking paste 70- + Clear cracking paste 0-30% + pigment ?% + fixing agent 2%

Deep: White cracking paste 20-30% + Clear cracking paste 70-80% + pigment ?% + fixing agent 2%

Printing process

1. Printing with clear cracking paste ( for underbase) for 1-2 times

2. Mixing with white cracking paste, clear cracking paste, pigment, fixing agent and stirring them evenly.

3. Printing again for 2-3 times (3-4 scrapes per time).

4. Drying the paste surface with cold air, it will be cracked by itself after it’s dry.

5. Hot pressing the printing for about 5 seconds with150℃to make it better adhesion.

6. Finish.

Attentions

1. Thick screen is suggested for the best effect (print for 1 time only).  If with thin screen,  please printing for 2-3 times, and blow the paste surface with cold air to dry it fast and re-printing before it’s cracked.

2. Please take the fabric up after it’s completely cracked, otherwise it’s won’t be cracked naturally.

3. More clear and thinner the paste is , thinner the crack is.

4. The pigment can not be exceeded in 12%, otherwise it'll be easily faded. 

品名

耐水洗龜裂漿        

外觀

糊狀

包裝

白膠漿25KG/桶，透明漿20KG/桶，打底透明漿20KG/桶

貯存期

常溫下6個月

應用

針織布

賣點

1. 高牢度耐水洗

2. 手感柔軟

3. 符合美國ASTM對鄰二甲酸脂和歐盟EN71 Part 3對重金屬含量的要求

調配比例

印淺色：龜裂白膠漿70- +龜裂透明漿0-30% + 色漿？% + 固化劑2%

印深色：龜裂白膠漿20-30% + 龜裂透明漿70-80% + 色漿？% + 固化劑2%

工藝流程

1. 絲網選用80-100目，用絲印硬方刀75度刮印，先用龜裂打底透明漿打底印1-2次, 板用力刮4-6刀

2. 將龜裂白膠漿，透明漿，色漿，固化劑攪拌均勻印2-3次（每次刮3-4刀）

3. 自燃干燥爆裂

4. 起布

注意事項

1. 印裂紋漿必須先打底才能保證水洗牢度

2. 若膠漿印前太稠可加水，切勿加固漿以免影響裂紋效果

3. 建議曬厚網印龜裂漿,一次印夠色為.若用薄網印刷,請用冷風吹漿層的表面,在漿層還沒有裂開之前返印.(裂紋的大小與多少可以在龜裂白和龜裂透明的互配比例和印出來的漿層厚薄控制,龜裂透明比例越多和印出來的漿層越薄它的裂紋就越細,反之它的裂紋越粗