點擊圖片查看大圖
中山進出口PEI塑料,沙伯基礎創新塑料 ULTEM 2300,2300F,2300R,2310,2310EPR,2310F,2310R.玻璃纖維填充30%, UL94 V0 and 5VA listing.包裝材料認證認可的顏色,
ULTEM ? Resin 2300 |
SI | | British | | Metric | Americas: COMMERCIAL |
| 30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification, KTW certification in recognized colors. |
|
Property |
| TYPICAL PROPERTIES (1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Tensile Stress, yld, Type I, 5 mm/min | 1720 | kgf/cm2 | ASTM D 638 | |
| Tensile Stress, brk, Type I, 5 mm/min | 1610 | kgf/cm2 | ASTM D 638 | |
| Tensile Strain, brk, Type I, 5 mm/min | 3 | % | ASTM D 638 | |
| Tensile Modulus, 5 mm/min | 94900 | kgf/cm2 | ASTM D 638 | |
| Flexural Stress, brk, 2.6 mm/min, 100 mm span | 2320 | kgf/cm2 | ASTM D 790 | |
| Flexural Modulus, 2.6 mm/min, 100 mm span | 91300 | kgf/cm2 | ASTM D 790 | |
| Hardness, Rockwell M | 114 | - | ASTM D 785 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, unnotched, 23°C | 43 | cm-kgf/cm | ASTM D 4812 | |
| Izod Impact, notched, 23°C | 8 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, Reverse Notched, 3.2 mm | 50 | cm-kgf/cm | ASTM D 256 | |
| THERMAL | Value | Unit | Standard | |
| Vicat Softening Temp, Rate B/50 | 227 | °C | ASTM D 1525 | |
| HDT, 0.45 MPa, 6.4 mm, unannealed | 212 | °C | ASTM D 648 | |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 210 | °C | ASTM D 648 | |
| CTE, -20°C to 150°C, flow | 1.98E-05 | 1/°C | ASTM E 831 | |
| Relative Temp Index, Elec | 180 | °C | UL 746B | |
| Relative Temp Index, Mech w/impact | 170 | °C | UL 746B | |
| Relative Temp Index, Mech w/o impact | 180 | °C | UL 746B | |
| PHYSICAL | Value | Unit | Standard | |
| Specific Gravity | 1.51 | - | ASTM D 792 | |
| Water Absorption, 24 hours | 0.16 | % | ASTM D 570 | |
| Water Absorption, equilibrium, 23C | 0.9 | % | ASTM D 570 | |
| Mold Shrinkage, flow, 3.2 mm (5) | 0.2 - 0.4 | % | SABIC Method | |
| Mold Shrinkage, xflow, 3.2 mm (5) | 0.2 - 0.4 | % | SABIC Method | |
| Melt Flow Rate, 337°C/6.6 kgf | 5 | g/10 min | ASTM D 1238 | |
| ELECTRICAL | Value | Unit | Standard | |
| Volume Resistivity | 3.E+16 | Ohm-cm | ASTM D 257 | |
| Dielectric Strength, in air, 1.6 mm | 24.8 | kV/mm | ASTM D 149 | |
| Dielectric Strength, in oil, 1.6 mm | 30.3 | kV/mm | ASTM D 149 | |
| Relative Permittivity, 1 kHz | 3.7 | - | ASTM D 150 | |
| Dissipation Factor, 1 kHz | 0.0015 | - | ASTM D 150 | |
| Dissipation Factor, 2450 MHz | 0.0053 | - | ASTM D 150 | |
| Arc Resistance, Tungsten {PLC} | 6 | PLC Code | ASTM D 495 | |
| Hot Wire Ignition {PLC) | 1 | PLC Code | UL 746A | |
| High Voltage Arc Track Rate {PLC} | 3 | PLC Code | UL 746A | |
| High Ampere Arc Ign, surface {PLC} | 4 | PLC Code | UL 746A | |
| Comparative Tracking Index (UL) {PLC} | 4 | PLC Code | UL 746A | |
| FLAME CHARACTERISTICS | Value | Unit | Standard | |
| UL Recognized, 94V-0 Flame Class Rating (3) | 0.25 | mm | UL 94 | |
| UL Recognized, 94-5VA Rating (3) | 1.21 | mm | UL 94 | |
| Oxygen Index (LOI) | 50 | % | ASTM D 2863 | |
| NBS Smoke Density, Flaming, Ds 4 min | 1.6 | - | ASTM E 662 | |
| Source GMD, last updated:1999/12/29 |
|
Processing |
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 150 | °C |
| Drying Time | 4 - 6 | hrs |
| Drying Time (Cumulative) | 24 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 350 - 400 | °C |
| Nozzle Temperature | 345 - 400 | °C |
| Front - Zone 3 Temperature | 345 - 400 | °C |
| Middle - Zone 2 Temperature | 340 - 400 | °C |
| Rear - Zone 1 Temperature | 330 - 400 | °C |
| Mold Temperature | 135 - 165 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 40 - 70 | rpm |
| Shot to Cylinder Size | 40 - 60 | % |
| Vent Depth | 0.025 - 0.076 | mm |
|
|
|
| 1285 |
Transparent Polyetherimide blend. ECO Conforming. US FDA and EU Food Contact Compliant in recognized colors. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2100 |
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 2100F |
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. US FDA and EU Food Contact Compliant, NSF 51 listing. WRAS certification in recognized colors. Datasheet Product Data: Auto Data: |
|
| 2100R |
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Auto Data: |
|
| 2110 |
10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2110EPR |
10% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2110R |
10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Auto Data: |
|
| 2200 |
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 2200F |
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors. Datasheet Product Data: Auto Data: |
|
| 2200R |
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Auto Data: Auto Specification |
|
| 2210 |
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: |
|
| 2210EPR |
20% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2210F |
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors. Datasheet Product Data: Auto Data: |
|
| 2210R |
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Auto Data: |
|
| 2212EPR |
20% Milled glass filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA lising. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2212R |
20% Milled glass filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Auto Data: |
|
| 2300 |
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification, KTW certification in recognized colors. Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: Auto Specification |
|
| 2300F |
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors. Datasheet Product Data: Auto Data: |
|
| 2300R |
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Auto Data: |
|
| 2310 |
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: Auto Specification |
|
| 2310EPR |
30% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 listing. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2310F |
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors. Datasheet Product Data: Auto Data: |
|
| 2310R |
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Auto Data: Auto Specification |
|
| 2312 |
30% Milled glass filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2312EPR |
30% Milled glass filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 listing. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2400 |
40% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. WRAS certification in recognized colors. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 2410 |
40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2410EPR |
40% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release for enhanced electroplatability. ECO Conforming, UL94 V0 listing. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 2410R |
40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Auto Data: |
|
| 3452 |
45% Glass fiber and mineral filled, enhanced flow Polyetherimide (Tg 217C) with enhanced dimensional stability. ECO Conforming, UL94 V0 and 5VA listing in recognized colors. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 4000 |
Glass fiber, PTFE, and Graphite filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 listing. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 4001 |
PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: |
|
| 4002 |
PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL 94 V0 and 5VA listing in recognized colors. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 4211 |
20% Glass fiber filled and PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming. Datasheet Product Data: Auto Data: |
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請詳細核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換